Many a computer gamer has scowled at the thought of trying to control an FPS with thumb sticks. When you're used to the precision and speed of a mouse, the analog stick feels, well... just wonky. XIM360 has built, what is hopefully a big step forward in inputs for the 360. The device is an add on to the XFPS, and supposedly delivers an experience that is "what you've always hoped to get".
The project came into existence when people, let down by the poor performance of the XFPS started augmenting it to try to get desired results. They used a board called XIM to get better control. The new board, XIM2 was built from the ground up to achieve the best possible experience. The XIM2 is now available for pre-order.
More information can be found on their website, as well as a large user forum of modders and hackers.
The mod is not particularly complex. The Microvision 360's creator [PvP_LostKnight] only removed the working parts from the Xbox 360's case and mounted them to the back of the TV. A few of the inputs of the TV had to be moved and rewired, and a repurposed and painted tupperware container was added to cover the Xbox 360 parts. Unfortunately, [PvP_LostKnight] did not post a writeup, and even added "The wiring for this is horrible, I would not recommend anyone trying this."
Setting aside his recommendation for a moment, a few of the advantages to his design are improved airflow to the Xbox 360 and better space usage. What we'd like to see added more than anything is power integration, with a single button to turn on both and a single power source powering the TV and the Xbox. See the proof of concept video after the break, or more photos and comments at the read link.
[F00 f00] of Acidmods was not satisfied with his first-person shooter gaming experience, so he modded an Xbox 360 controller so that A, B, X and Y buttons are on the underside of the controller, on the inside edges of the wings where the player's fingertips usually go. He also moved the right thumbstick up a bit so that it would be level with the left one. He designed it to improve his ability to play first person shooters, but the advantages go beyond one genre of game. The right thumb is free to remain on the right thumbstick, and the colored buttons can be pressed by four fingers instead of just the right thumb. We love this mod for it's simplicity and effectiveness, and we're eagerly awaiting the internal photos he promised.
In an unexpected development, [Neil Stanley Higgs], aka Mr. Modchips, was cleared of his previous convictions in British courts for selling modchips for the Xbox 360 as well as modded consoles.
Notably, the prosecution did not argue that he infringed copyrights, but merely facilitated copyright infringement by selling modchips that circumvent the Xbox's ETM. Since the copyright infringement argument was not made, existing law continues to hold sellers of pirated games and owners of modded consoles responsible for infringing the copyrights of game developers, as they are the ones who illegally copy the software. Pirated game sellers' violation of the law is plain to see, but owners are still held responsible the moment they place the pirated disc into the loading tray and boot it up. The infringement in these cases occurs exactly when any part of the pirated game is loaded onto the console's RAM, as this is considered another illegal copy.
[Higgs]'s charges hinged on whether the Xbox's piracy prevention methods were intended to completely prevent pirated games from being played or merely act as a hindrance. The court felt it was the latter, and so they reversed the charges.
If you've been wondering about what changes Lian-Li implemented in their commercial XBox 360 casemod called the PC-XB01, they've recently updated their product page.
The case does not add any new functions to the console, but it improves its efficiency on several levels. To deal with the noise produced by the DVD drive, they installed sheets of sound insulation foam around the drive, greatly reducing the sound it makes when it spins up. They did even more for temperature control, replacing the standard dual 70mm fans with a single 120mm fan that cools more efficiently and quietly. The case is also larger and features a frontside grate, allowing for vastly improved airflow. Lian-Li designers even left opening in the back for option water tubes in case you want to add a liquid cooling system.
[CyberPyrot] and [l0rdnic0] released their spitfire mod on acidmods for XBox 360 controllers. It involves some fine wiring, but a relatively low parts count. The heart of the mod is a PIC16F84A, a crystal for the clock and a few passive parts. It took me a little while to find it, but the code for the pic hiding under the parts list. For a lengthy demo of the mod in action, you can check out this video.
[] sent in this voice controlled video game project. The idea is simple and honorable: make gaming accessible to the physically limited. [Cyberpyrot] used a voice recognition kit and interfaced it with a bog standard XBox 360 controller. Looks like a fairly easy project if you're familiar with the pointy end of a soldering iron.
If you are curious about reading all the bits on a DVD, [tmbinc] has devised a hardware hack that uses a Pioneer DVD drive with leads soldered onto it and a Cypress FX2 microcontroller board to grab the flow of bits and push them over USB2.0. My favorite part of this tutorial is when you slow the spinning DVD down very slightly with your finger with a scope hooked up over what you believe to be the raw data stream from the disk. If the data rate slows when you physically slow down the disk, you probably are grabbing data from the correct pin. [tmbinc] even put together a software tool to process the resulting raw DVD data.
[Xantium] let me know about the latest from the XBox Scene. The attack that was just a proof of concept is now a fully released hack. [Robinsod] released details on how to perform the 'Timing Attack' in order to downgrade the 360s kernel to a hackable version. The hack requires an infectus mod chip, a PIC interface built around a 16F876A and a software package to get things rolling. The big deal is that you can now downgrade your 360 from any kernel to an exploitable version. Considering the previous limitations, this is pretty exciting news for the homebrew crowd.
[Paul] let me know about a new way to get a hacked kernel on a XBox 360. A new timing attack will soon allow you to install an older kernel with without having the CPU key which was the catch 22 situation before. The proof of concept ressurected a bricked XBox by doing some interesting things to one of the NAND (memory) blocks on the machine. Great news for the homebrew/hacking scene!
[UberNoober147] and [Carey] both sent in this round about hack. The Wiimote is interfaced with a PC. The PC outputs to a micro-controller circuit that outputs PlayStation 2 control signals. That's connected to a XFPS - a PS2 to XBox 360 controller converter. It's definitely round about, but it works.
I got quite a few emails about this, but didn't have a chance to check it out until now. It seems that the feds have been raiding various mod shops and individuals who've been doing mods for others. I'm a fan of open, moddable and repairable hardware, so this is sad news to me. There's a first hand account from one of the raided individuals along with a decent commentary on the issue sent in by [xantium]. This might sound a bit strange, but take the time to let your congress critter know what you think about this issue. Don't expect them to understand the technical background, but letting them know that you're unhappy with the execution of the DMCA and that labeling legitimate uses for mod-chip technology as illegal is the equivalent to outlawing home car repair might make a difference.
[XanTium] sent this in a few days ago, but I thought you guys would dig it. Here are the details straight from his email:
Hackers on the XBH forums managed to change DVD key and Game Region Code in the Xbox 360 'Key Vault' (that stores on flashchip: console certificate(s), per-box private keys, DVD key, however NOT any code-related encryption keys). However you should know the 'Key Vault' is encrypted with the per-xbox360 'CPU key', so that means this hack is only possible on Hypervisor exploitable Xbox360s (kernel 4532 and 4548) for now. You will of course also have to read/flash the Xbox360 flashchip (by desoldering it and read/flash it with programmer or for example use the versatile Infectus dev chip)
You can read up on some more details here or get a login and check out the actual forum thread. The end result: play EU games on your US 360. (It doesn't sound like the DVD movie region has been successfully changed, but modded DVD players are easy to make.)
Arcade joystick retrofits aren't usually that interesting. This one sent in by [Jock] caught my eye for one reason - using those cheap RadioShack reed switch relays to adapt the joystick output to the 360 controllers Dpad. Personally, I think I would have thrown some opto-isolators at it - but the one's that RS (sometimes) has are pretty crappy.
We got news of a pair of interesting gaming hacks today. [XanTium] let us know the latest on XBox 360 kernel hacking. It's a little catch-22, but if you have the cpu id on your 360, you can downgrade your kernel even if it's been updated. (But, you need to have the old kernel already if you want to retrieve it.)
The boys over at engadget just put this up a little while ago. Thanks to [Noobz] and [Archaemic], it's now possible to run homebrew on any firmware version of your PSP - but you'll need a copy of the game Lumines.
